Ciao scrivo a chi possiede la pedaliera GSC3. Ho cablato e programmato gran parte delle funzioni della pedaliera (preset, gestione banchi, switch tap tempo) Non riesco, per quanto segua il manuale in modo analitico, a programmare gli switch 6/7/8 sui banchi 1/2/3/4 in modo che permettano il controllo in tempo reale dei loop via via assegnati agli switch in questione. Il mio intento è di assegnare gli switch a loop diversi a seconda della patch richiamata... "Controller enables to transmit 7 controllers’ numbers. In settings are programmed controllers’ numbers and for a particular preset (or a MIDI modifier) are programmed values of controllers which should be transmitted. a) Memory access lock switch to LOCK position (pressed, LOCK indicator lit). Press and hold SWITCH button and while it is pressed switch memory access lock to UNLOCK position (LOCK indicator stops to light). SWITCH indicator will start to blink and LOOP, MIDI 1 and MIDI 2 indicators will start to light. Text SP2 will appear on display c) Short pressing footswitches numbered from 1 to 7 will effect in displaying actual controller number assigned to a particular footswitch. Short pressing of one of the footswitches from No. 1 to No. 7 will display the current controller number (or MIDI channel number on the mode of sending seven Program Change commands) assigned to the particular footswitch. d) Press and hold for longer than 1 second the controller footswitch intended to be changed (blinking “0” will appear on display). A controller number can be from 0 to 127 range. Press intended numbered footswitches. e) Footswitch No. 8 (by successive pressings) enables to set the SWITCH 1 to 4 working modes